ā11-18-2010 09:02 AM - edited ā03-16-2019 02:00 AM
Good Day,
Somebody could tell me if I can replace a ip phone 7911G by a SPA502G, that is to say, both have the same characteristics and I can plug both with the call manager version 6.x
Solved! Go to Solution.
ā11-18-2010 09:14 AM
Hi Jorge,
The SPA500 series of IP Phones are only supported with the UC520
540, 560 Small Business Systems They are not supported on any CUCM version
(including 4.x, 5.x, 6.x, 7.x or 8.x)
https://supportforums.cisco.com/docs/DOC-9551
Cheers!
Rob
ā11-18-2010 09:14 AM
Hi Jorge,
The SPA500 series of IP Phones are only supported with the UC520
540, 560 Small Business Systems They are not supported on any CUCM version
(including 4.x, 5.x, 6.x, 7.x or 8.x)
https://supportforums.cisco.com/docs/DOC-9551
Cheers!
Rob
ā11-18-2010 09:35 AM
than you rob for your help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: