I need comunicate iptel's both they don't have permission to arrive among
As I can make to communicate iptel's that are registered the same CCM but they don't have permission to arrive from a telephone until another in the net. Can one make that the call passes through of the CCM? . The telephones use the same codec, pool... the version of the CCM 4.1(2) and the telephones are 7902. Greetings
Re: I need comunicate iptel's both they don't have permission to
I'm not sure as to what exactly ur trying to ask, but from what I can understand as of now, you want a call to hit a phone only when being transferred from a Phone registered to the CallManager and not when someone is calling in from PSTN.
If this is right, yes, it is very much possible. There are many ways of doing it and it depends on ur setup and more importantly the call flow.
Can u add more details as to what exactly you are trying to achieve
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...