We have a ICS 7750 with SPE 310 running Call Manager 3.1(3a). We had a failed drive. The ICS is no longer covered by SmartNet. We have ordered the systems for upgrade Unified Communications Express but that is still a month away.
Can I replace just the IDE drive on the existing SPE 310 or do we need to (somehow) get our hands on another SPE 310 w/ the drive - will replacing just the drive on the existing SPE work?
To install and use Cisco ICS 7750, you must have an ICS 7750 chassis equipped with SPE310 cards. The SPE310 offers a keyboard/mouse port, a video port, and two universal serial bus (USB) ports that support standard USB devices such as CD-ROM drives. Refer the following documents:
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...