we are cisco partner , my customer has a PBX ( siemens ) and he want to make voice mail , so i went to cisco unity and i searched in cisco website about the integration between PBX and unity server i found product (UNITY-PIMG-DIG) my question is :
1- does this product will fit my solution ?
2- and if it fit i read in its data sheet it has limitation (Please note that the Cisco Unity PIMG has regulatory certification for sale in the United States,
Canada, and Western Europe (CE countries) only.)
and we are here in Egypt = Middle East so will be ok with our contry or not ???
3- If this product don't fit with us , wats ur recommended for our case ??
Ports are voice/paths to the unity. we used 4 pings to interface to 32, 8 each pimg, digitals stations for 32 port capacity. i have attached the cisco intergration doc. is this long term? or will callmanager be installed at some point?
iintegration between cisco unity and PBX Panasonic
Hi, i read the "Integration between cisco unity and PBX" forum, and i saw theres a pdf document about pimg , but for Siemens equipment, there's a pdf. document about integration but for Panasonic pbx? (Panasonic Electronic Modular Switching System 308 Easa-Phone)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...