Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

image dwnload failed -- 7921 UCME 4.2

Hi,

I have a router 2821 with ucme 4.2 and phones 7921 and 7920. When the 7921 phones are starting a message show up ih the phone screem "image download failed". The 7920 phones download the image successfully.

This is the configuration:

tftp-server flash:cmterm_7920.4.0-03-02.bin

tftp-server flash:CP7921G-1.0.3/CP7921G-1.0.3.LOADS

tftp-server flash:CP7921G-1.0.3/APPS-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/GUI-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/SYS-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/TNUX-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/TNUXR-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/WLAN-1.0.3.SBN

!

telephony-service

load 7921 CP7921G-1.0.3

load 7920 cmterm_7920.4.0-03-02

ephone-dn 1

number 260

corlist incoming Externas

!

!

ephone-dn 2

number 261

corlist incoming Externas

!

ephone 1

mac-address 001D.A230.FCDD

type 7921

button 1:1

!

!

!

ephone 2

mac-address 001A.A17A.FF9D

type 7920

button 1:2

!

!

Thanks for your help.

Regards

3 REPLIES
Hall of Fame Super Gold

Re: image dwnload failed -- 7921 UCME 4.2

Hi,

please add an alias keyword to you tftp-server command, that specifies the file in lowercase and without a directory.

You can check what the phone request, and if the router give the file with "debug tftp events".

Hope this helps, please rate post if it does!

New Member

Re: image dwnload failed -- 7921 UCME 4.2

Hi,

I have tried with tftp alias but I have the same problem. I have actived the debug tftp events and terminal monitor and I see nothing. It is strange that I can not see a ftp request from the phone to UCME however the tftp server is working fine because the 7920 phones download the image OK.

Now this is the configuration:

tftp-server flash:cmterm_7920.4.0-03-02.bin

tftp-server flash:CP7921G-1.0.3/CP7921G-1.0.3.LOADS alias cp7921g-1.0.3.loads

tftp-server flash:CP7921G-1.0.3/APPS-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/GUI-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/SYS-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/TNUX-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/TNUXR-1.0.3.SBN

tftp-server flash:CP7921G-1.0.3/WLAN-1.0.3.SBN

!

telephony-service

load 7921 cp7921g-1.0.3

Thanks.

Regards

Hall of Fame Super Gold

Re: image dwnload failed -- 7921 UCME 4.2

Hi,

the phone should send a TFTP request for sure. Try a factory reset (not sure how to do it on a 7921).

394
Views
0
Helpful
3
Replies