1. We've created an exact copy of CCM 4.1.3 in our test lab.
2. Migrated CCM 4.1.3 database by using DMA
3. Upgrade CCM 4.1.3 in test lab to 6.x
4. During upgrade, Imported DMA tar file.
Everything in the lab is working fine and we are ready to upgrade the live environment to 6.x. Since the import was some time ago and we've made many new changes in the live 4.1.3 environment, we need a more updates TAR file but we just want want to swap the live 4.1.3 disks with the test lab version 6.x drives into the live servers.
Can we do a new import of the TAR file or do we first need to reinstall the 6.x publisher and import the file during upgrade ? ( upgrade took very long time and we can save a lot of time if we can just insert a new TAR file again)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...