03-02-2012 01:17 PM - edited 03-16-2019 09:54 AM
Hi Voice team,
I can to do conference just between 4 internal users..
How can I to improve my solution? I want to do conference with 8 internal users....
I need more PVDM?
I´m using a 2821 to manage the codecs in a conference.
sccp local GigabitEthernet0/0.20
sccp ccm 172.20.1.106 identifier 1 priority 1 version 4.1
sccp
!
sccp ccm group 1
description *** config para conferencia ***
bind interface GigabitEthernet0/0.20
associate ccm 1 priority 1
associate profile 7 register XCODER
!
dspfarm profile 7 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
NAME: "2821 chassis", DESCR: "2821 chassis"
PID: CISCO2821 , VID: V01 , SN: FTX0919A01F
NAME: "WAN Interface Card - Serial 2T", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T= , VID: 1.0, SN: 28425856
NAME: "One port E1 voice interface daughtercard", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1= , VID: 1.0, SN: 30225314
NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64 , VID: V01 , SN: FOC130410QS
NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64 , VID: V01 , SN: FOC12510WCM
NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"
PID: AIM-VPN/EPII-PLUS , VID: NA, SN: FOC09111HEJ
NAME: "NM-SE", DESCR: "NM-SE"
PID: NM-CUE , VID: V03, SN: FOC120137RY
NAME: "40GB IDE Disc Daughter Card", DESCR: "40GB IDE Disc Daughter Card"
PID: , VID: 1.0, SN: FOC115265SW
Solved! Go to Solution.
03-05-2012 06:16 AM
Change the "MaxAdHocConference" and "MaxMeetMe Conference" CUCM service parameters to 8, by default they are set to 4.
HTH,
Chris
03-02-2012 01:42 PM
CME? CUCM?
03-05-2012 05:30 AM
CUCM..software conference...
03-05-2012 06:16 AM
Change the "MaxAdHocConference" and "MaxMeetMe Conference" CUCM service parameters to 8, by default they are set to 4.
HTH,
Chris
03-05-2012 06:48 AM
Thanks Chris.
I have another doubt:
- My environment is:
CUCM (software bridge) and transcode on the local VG < > WAN < > CME conference
How Can I to improve the number of the conference participants between the sites?
thanks
03-05-2012 06:55 AM
What do you want to improve? The parameter you changed apply to all conferences initiated from CUCM side, if you want to allow more than 3 participants for conferences initiated on CME side you need to use hardware bridge on CME as the software CME bridge is limited to only 3 participants.
HTH,
Chris
03-05-2012 07:28 AM
Hi Jean,
Just to add a note to the great tips from Chris, check out this excellent doc from Tony @ Cisco
https://supportforums.cisco.com/docs/DOC-9464
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide