Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Improving the conference

Hi Voice team,

I can to do conference just between 4 internal users..

How can I to improve my solution? I want to do conference with 8 internal users....

I need more PVDM?   

I´m using a 2821 to manage the codecs in a conference. 

sccp local GigabitEthernet0/0.20

sccp ccm 172.20.1.106 identifier 1 priority 1 version 4.1

sccp

!

sccp ccm group 1

description *** config para conferencia ***

bind interface GigabitEthernet0/0.20

associate ccm 1 priority 1

associate profile 7 register XCODER

!

dspfarm profile 7 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

associate application SCCP

NAME: "2821 chassis", DESCR: "2821 chassis"
PID: CISCO2821         , VID: V01 , SN: FTX0919A01F

NAME: "WAN Interface Card - Serial 2T", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 28425856

NAME: "One port E1 voice interface daughtercard", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1=     , VID: 1.0, SN: 30225314

NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN: FOC130410QS

NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN: FOC12510WCM

NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"
PID: AIM-VPN/EPII-PLUS , VID:   NA, SN: FOC09111HEJ

NAME: "NM-SE", DESCR: "NM-SE"
PID: NM-CUE            , VID: V03, SN: FOC120137RY

NAME: "40GB IDE Disc Daughter Card", DESCR: "40GB IDE Disc Daughter Card"
PID:                   , VID: 1.0, SN: FOC115265SW

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Improving the conference

Change the "MaxAdHocConference" and "MaxMeetMe Conference" CUCM service parameters to 8, by default they are set to 4.

HTH,

Chris

6 REPLIES
Super Bronze

Improving the conference

CME? CUCM?

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Improving the conference

CUCM..software conference...

Hall of Fame Super Silver

Improving the conference

Change the "MaxAdHocConference" and "MaxMeetMe Conference" CUCM service parameters to 8, by default they are set to 4.

HTH,

Chris

New Member

Improving the conference

Thanks Chris.

I have another doubt:

- My environment is:

CUCM (software bridge) and transcode on the local VG < > WAN < > CME conference

How Can I to improve the number of the conference participants between the sites?

thanks

Hall of Fame Super Silver

Improving the conference

What do you want to improve?  The parameter you changed apply to all conferences initiated from CUCM side, if you want to allow more than 3 participants for conferences initiated on CME side you need to use hardware bridge on CME as the software CME bridge is limited to only 3 participants.

HTH,

Chris

Hall of Fame Super Red

Improving the conference

Hi Jean,

Just to add a note to the great tips from Chris, check out this excellent doc from Tony @ Cisco

https://supportforums.cisco.com/docs/DOC-9464

Cheers!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
587
Views
0
Helpful
6
Replies
This widget could not be displayed.