cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
438
Views
5
Helpful
7
Replies

Inboud calls to FXO

microtel
Level 1
Level 1

Hello,

I have CCME 4.0(3) on routeur 2801 and

I want to redirect the inbound calls from PSTN to four IP Phones. So when we call from the PSTN the 4 Ip Phones Ring.

I know that it is possible with connection PLAR on voice port but it support only one ephone-dn

Thankyou for your help

Malek

7 Replies 7

Jaime Valencia
Cisco Employee
Cisco Employee

Hunt Groups

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1118926

Hunt groups allow incoming calls to a specific number (pilot number) to be directed to a defined group of extension numbers.

Incoming calls are redirected from the pilot number to the first extension number as defined by the configuration. If the first number is busy or does not answer, the call is redirected to the next phone in the list. A call continues to be redirected on busy or no answer from number to number in the list until it is answered or until the call reaches the number that is defined as the final number.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Do you want the 4 phones to ring simultaneously, or hunt from one to another?

dbenattou
Level 1
Level 1

hello,

you can do so by configuring the hunt group and the time between each phone must be very low.

Driss

microtel
Level 1
Level 1

Thanks evrybody for your help.

CCME 4.0 can not support parralel ring, but it support sequentiel and i tune timout to 15s

Thanks

in case you're interested CME 4.3/7.0 does support it now

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Please can u tell me witch IOS version embeed CCME 4.3 for 2801, I am looking for this version with software advisor but the recent one is 4.0.3

Thanks

Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

Cisco Unified CME 7.0/4.3 Supported Firmware, Platforms, Memory, and Voice Products

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: