Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Inbound call blocking based on ANI

Has anyone ever had to try and block calls from one specific outside caller with one specific ANI to one internal user?

5 REPLIES

Re: Inbound call blocking based on ANI

If you're using H.323 on the gateway, one way to do this is with a voice translation rule. You can use the "reject" keyword when creating the rule. Take a look at the following link.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Inbound call blocking based on ANI

Hi !

Thanks for the response! No, all I have to work with is ccm 4.1(3) and mgcp gateways on both 6608's and cmm mods. :(

Matt

Re: Inbound call blocking based on ANI

Matt,

There's no way to do this with MGCP that I'm aware of.

Brandon

New Member

Re: Inbound call blocking based on ANI

hi!

you know, i read this document and it looks like the only way to reject calls is based on the dialed number. I want to know if there is anyway to block calls from a specific number... ???

thanks,

matt

Re: Inbound call blocking based on ANI

Yes, in the translation profile, you can use "translate calling" along with the "reject" keyword in the rule to block callling numbers.

Brandon

255
Views
0
Helpful
5
Replies
CreatePlease to create content