Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inbound Call Digit Manipulation on 3845 Router

Currently we have 3 digits sent by the carrier on inbound calls in Italy. We are using 4 digit ext. numbers on our cluster (to allow for future growth). We will be using MGCP on the 3845. Can anyone tell how to add in an extra digit infront of the ext number when it arrives at the gateway eg. 234 would become 1234 and then hit the correct ext number on call manager.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Inbound Call Digit Manipulation on 3845 Router

not with MGCP, you would need to use H323 and translation rules.

or, add it as a prefix under the CUCM GW config.

but directly on the router only with H323

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Inbound Call Digit Manipulation on 3845 Router

not with MGCP, you would need to use H323 and translation rules.

or, add it as a prefix under the CUCM GW config.

but directly on the router only with H323

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
122
Views
0
Helpful
1
Replies