Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Inbound calls disconnect after 60 seconds ringing....

Hi Folks,

Is there a global parameter in CUCM that issues a disconnect after ringing Cisco phones for 60 seconds?

Example, if you ring a cisco phone (using external DDi number), the call will drop after 60 seconds of ringing. I was thinking it may be related to the 'TLS Handshake timer' in the Enterprise Parameters. It only seems to happen from calls in from the PSTN though

Thanks..

1 REPLY
New Member

Inbound calls disconnect after 60 seconds ringing....

Ok so I think I have narrowed this down to be the carrier. AS when I used a phone number from a different carrier the timer was increased to 90 seconds...SO i guess I need to speak with the carrier...

153
Views
0
Helpful
1
Replies