Hi Guys,
here is the configuration that is running in my organiztion.as there is two call legs in each call and every call leg has to match dial-peer,as i didnt understand in the configuration below, call from cucm matches which dial-peer or it matches default dial-peer 0
i am asking inbound dial-peer from cucm to router???
!
dial-peer voice 1000 voip
description To CallManager -
preference 1
destination-pattern 42602..
voice-class codec 1
voice-class h323 1
session target ipv4:X.X.X.X
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 1 pots
description ** incoming DID **
incoming called-number .
direct-inward-dial
!
dial-peer voice 100 pots
description ** To PSTN Service **
destination-pattern 9.T
port 0/2/0:1
!
