Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inbound SIP calls issues

I been experiencing some weird behavior from inbound SIP calls. Outbound works great..

Ok this the dilemma. The calling party don't get a ring back while the called party rings. Called party picks up and the call drops after 10 seconds, in the mean time if the calling party don;t hang up the phone the called phone start ringing again as a new call where in fact the calling party never disconcerted the call.. This can continue all day in a loop if the calling party don;t hang up..

I hope i did explain it correcly.. This is some of the logs: If someone can give me any hints of what could be wrong greatly appreciated..

.Mar 28 01:42:37.829: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:3475780000@x.x.x.x:5060 SIP/2.0

Reason: Q.850;cause=86

Date: Wed, 28 Mar 2012 01:41:59 GMT

From: <sip:20130100000@x.x.x.x.x>;tag=4326E92C-177

Timestamp: 1332898957

Content-Length: 0

User-Agent: Cisco-SIPGateway/IOS-12.x

To: "347570000" <sip:3475700000@x.x.x.x>;tag=as525083e9

Call-ID: 02d32716428add3450773fe80e6fdb70@x.x.x.x

Via: SIP/2.0/UDP 192.168.1.26:5060;branch=z9hG4bK1343D256D

CSeq: 101 BYE

Max-Forwards: 70

.Mar 28 01:42:41.828: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:347500000@64.154.x.x:5060 SIP/2.0

Reason: Q.850;cause=86

Date: Wed, 28 Mar 2012 01:41:59 GMT

From: <sip:2013000000@24.47.x.x>;tag=4326E92C-177

Timestamp: 1332898961

Content-Length: 0

User-Agent: Cisco-SIPGateway/IOS-12.x

To: "34757800000" <sip:3475780000@64.154.x.x>;tag=as525083e9

Call-ID: 02d32716428add3450773fe80e6fdb70@64.154.X.X

Via: SIP/2.0/UDP 192.168.1.26:5060;branch=z9hG4bK1343D256D

CSeq: 101 BYE

Max-Forwards: 70

.Mar 28 01:42:45.828: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:3475700000@64.154.X.X:5060 SIP/2.0

Reason: Q.850;cause=86

Date: Wed, 28 Mar 2012 01:41:59 GMT

From: <sip:20130100000@24.47.X>X>;tag=4326E92C-177

Timestamp: 1332898965

Content-Length: 0

User-Agent: Cisco-SIPGateway/IOS-12.x

To: "347570000" <sip:347570000@64.154.X.X>;tag=as525083e9

Call-ID: 02d32716428add3450773fe80e6fdb70@64.154.X.X

Via: SIP/2.0/UDP 192.168.1.26:5060;branch=z9hG4bK1343D256D

CSeq: 101 BYE

Max-Forwards: 70

.Mar 28 01:42:49.827: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:3475780000@64.154.X.X:5060 SIP/2.0

Reason: Q.850;cause=86

Date: Wed, 28 Mar 2012 01:41:59 GMT

From: <sip:2013010000@24.47.X.X>;tag=4326E92C-177

Timestamp: 1332898969

Content-Length: 0

User-Agent: Cisco-SIPGateway/IOS-12.x

To: "3475700000" <sip:3475780000@x.x.x.x>;tag=as525083e9

Call-ID: 02d32716428add3450773fe80e6fdb70@64.154.X.X

Via: SIP/2.0/UDP 192.168.1.26:5060;branch=z9hG4bK1343D256D

CSeq: 101 BYE

Max-Forwards: 70

.Mar 28 01:42:53.827: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:3475784000@x.x.x.x:5060 SIP/2.0

Reason: Q.850;cause=86

Date: Wed, 28 Mar 2012 01:41:59 GMT

From: <sip:2013017000@24.47.X.X>;tag=4326E92C-177

Timestamp: 1332898973

Content-Length: 0

User-Agent: Cisco-SIPGateway/IOS-12.x

To: "3475780000" <sip:3475780000@64.154.X.X>;tag=as525083e9

Call-ID: 02d32716428add3450773fe80e6fdb70@64.154.X.X

Via: SIP/2.0/UDP 192.168.1.26:5060;branch=z9hG4bK1343D256D

CSeq: 101 BYE

Max-Forwards: 70

12 REPLIES

Inbound SIP calls issues

Could you please post complete debug for the call (starting with INVITE )

Thank you.

New Member

Re: Inbound SIP calls issues

Hello- Thanks for the reply, please see attached file..

Cisco Employee

Inbound SIP calls issues

Hi,

The logs are incomplete. Also brief the call flow like what are components involved in the call flow

Regards,

Senthil

Hall of Fame Super Gold

Inbound SIP calls issues

Maybe mention system type and version you have, and the exact complete call flow on all devices traversed.

New Member

Inbound SIP calls issues

Paolo,

My mistake, CME 7.1 on 2801 router 12.4(22)YB8..

Call flow PSTN-SIP Provider-CME 7.1- Cisco Phone7970..

New Member

Inbound SIP calls issues

Never mind- Got it.. It was a nat-ing issue.. got it to work.. Thank you guys!!

Inbound SIP calls issues

Hi,

Can you let us know the solution.

Thanks a bunch

New Member

Inbound SIP calls issues

HI.

try add this commnand under service voip .

voice service voip

ip address trusted list

  ipv4 0.0.0.0 0.0.0.0

Best Regards

Marwan Urabi

New Member

Inbound SIP calls issues

Marwan I dont have that option ip address trusted list.. I'm running CUE 7.1 btw..

New Member

Inbound SIP calls issues

HI,

before 2 month i use CME 4.1 on Router 1760 and this conifg is work for me .

voice rtp send-recv

!

voice service pots

supplementary-service qsig call-forward

!

voice service voip

qsig decode

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service h450.7

supplementary-service h450.12

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco

h323

sip

  registrar server expires max 3600 min 3600

after i upgrade to 8.5 on router 2811 , i have this problem and i solve it like this :

voice rtp send-recv

!

voice service pots

supplementary-service qsig call-forward

!

voice service voip

ip address trusted list

  ipv4 0.0.0.0 0.0.0.0

qsig decode

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service h450.7

supplementary-service h450.12

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco

h323

sip

  bind control source-interface FastEthernet0/0

  bind media source-interface FastEthernet0/0

  registrar server expires max 1200 min 660

i dont know if the ip address trusted list command avilable on CME 7.1,

Please check also 2 command under SIP

if is not work ,  please post your sample config and i will compare it with CME 4.1 i have it to .

Best Regards

Good Luck

Marwan

New Member

Inbound SIP calls issues

2801CME(conf-voi-serv)#ip address ?

% Unrecognized command

2801CME(conf-voi-serv)#ip address

Looks like its not..:)

New Member

Inbound SIP calls issues

Actually I just found out that this is part of cisco's toll-fraud-prevention available on v 15.1(2)T and later.. I'm running v

12.4(13r)T..

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080b3e123.shtml

1456
Views
0
Helpful
12
Replies