Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Incoming Calls from SIP Line

Hey Guys,

 

Have a SIP Trunk directly to Service Provider from CUCM (no cube). Outgoing calls are working fine and we just brought an incoming number (US Number) . How do I make this work ?

 

Thanks

VR

2 REPLIES

At the simple level, you just

At the simple level, you just need to configure up something on CUCM to handle calls for the number that's presented to you by your service provider. This could be a DN on a phone, a Route Group, Hunt PIlot, Translation Pattern, etc...

 

GTG

Please rate all helpful posts.

Also, make sure you have the

Also, make sure you have the correct CSS assigned for the inbound calls & set the correct significant digits in the SIP Trunk Configuration you have.

 

 

//Suresh Please rate all the useful posts.
47
Views
0
Helpful
2
Replies