Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Incoming Number missing leading 0

Hi Guys,

Probablay a really easy one, but my incoming numbers being displayed on my Cisco Phones are missing the leading zero. so 01603 111111 called and phone says 1603111111 , its causing issues with call number lookup.

Many Thanks

Paul

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

Re: Incoming Number missing leading 0

You're welcome. Please remember to rate useful posts with the scrollbox below.

VIP Super Bronze

Re: Incoming Number missing leading 0

You could also use this..

voice translation-rule 2

rule 2 /\(.+\)/ /90\1/ type unknown unknown

rule 3 /\(.+\)/ /90\1/ type national national

rule 4 /\(.+\)/ /900\1/ type international international

!

voice translation-profile DDI

translate calling 2

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
8 REPLIES
Hall of Fame Super Gold

Re: Incoming Number missing leading 0

CM? MGCP or H.323 ?

New Member

Re: Incoming Number missing leading 0

Sorry,

CME 7 and MGCP.

Thanks

VIP Super Bronze

Re: Incoming Number missing leading 0

Hi,

What do you mean CME7 and MGCP...MGCP is used with cisco callmanager!!! not CCME

Can you clearify what protocol your gateway is running and what call routing agent you are using..CCM4 or 5 or 6

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: Incoming Number missing leading 0

Sorry

I have a CME 7 to which BT are providing 30 IDSN channels over a E1 Serial Interface. The CME is handing all call processing.

Paul

Hall of Fame Super Gold

Re: Incoming Number missing leading 0

You should be fine with the following:

voice-port x/y:15

translation-profile incoming IN

voice translation-rule 10

rule 1 // /0/ type national national

rule 2 // /00/ type international international

voice translation-profile IN

translate calling 10

New Member

Re: Incoming Number missing leading 0

Thanks

Absolute winner, I always get confused with translation rules.

Thanks Again

Paul

Hall of Fame Super Gold

Re: Incoming Number missing leading 0

You're welcome. Please remember to rate useful posts with the scrollbox below.

VIP Super Bronze

Re: Incoming Number missing leading 0

You could also use this..

voice translation-rule 2

rule 2 /\(.+\)/ /90\1/ type unknown unknown

rule 3 /\(.+\)/ /90\1/ type national national

rule 4 /\(.+\)/ /900\1/ type international international

!

voice translation-profile DDI

translate calling 2

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
211
Views
0
Helpful
8
Replies