Incoming PSTN Calls

[aamirdhedhi]

Dear Friends

I have an issue with my ip phones, i want all the phones (5) to ring when the call lends at the router. can any one please help me with this, the system is working fine just wanna resolved the above issue. There are four 7912 phone and one 7940 phone

Cheers

Aamir

[STEFAN CHRISTEN]

Hi Amir

You should probably mention if you're using Communications Manager or Communications Manager Express and what version of it.

Regards

Stefan

[aamirdhedhi]

Hi Stefan

Sorry for the delay in replying, Its communication manager express version 4.0

Cheers

Aamir

[pemelend]

Hi Aamir

Looks like you want a shared line or overlaid DN.

You need to assign the same ephone-DN on all the ephones.

ephone-dn 1

number 1000

ephone 1

button 1:1

|

ephone 2

button 1:1

|

|

|

ephone 5

button 1:1

You might get more help from this link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1013228

Regards

Pedro

[Nicholas Matthews]

Hi Aamir,

It's not quite like that. You can see the configuration guide for CME 4.0 shared lines will utilize a number of overlaid. Note that each DN will only have 2 channels, so for 5 lines you will want to use more than one DN like the example that Pedro provided. If you want each user to be able to have 2 lines ( in this case a maximum of 10) you will want to configure 5 dual line DNs.

Something like this will help;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1099687

hth,

nick