Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Incoming SIP Calls to CUBE not working correctly

Dear All,

Is there a way to change the INVITE port to non 5060 ?

My provider is saying that my CUBE is dropping calls because its not accepting INVITE from non 5060 ports.

The port for the INVITE and contact header do not match and their ACK for The 200 OK go to port 5060 and my CUBE is not getting the ACK they send.

I should change the INVITE port from a non 5060 so it matches what the CUBE sends in the contact header.

Any input of comment on this will be greatly appreciated.

Regards,

Zahid

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Incoming SIP Calls to CUBE not working correctly

for outgoing calls invite can be change using session target ipv4:1.1.1.1:5061

for incoming:

http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1389955

1 REPLY
Green

Re: Incoming SIP Calls to CUBE not working correctly

for outgoing calls invite can be change using session target ipv4:1.1.1.1:5061

for incoming:

http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1389955

161
Views
0
Helpful
1
Replies
CreatePlease to create content