Setting: 2 phones (7962's) connected to POE switch (3750) which has a link to 2911 running SIP CME 9.0...
State: Both phones register perfectly with newest SIP code.
Condition: 1 out of every 3 call's from either phone to the other fails... no ring on the destination phone... So one call works... call completes, 2 way talk path, then hang up and redial, and no ringy... Is this potentually a DTMF relay issue? I have dtmf-relay sip-notify enabled on all pools...
See config below:
service timestamps debug datetime msec
service timestamps log datetime
logging buffered 20000
enable secret XXXXX
no aaa new-model
no ipv6 cef
ip dhcp excluded-address 192.168.222.0 192.168.222.10
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...