I am facing a strange issue. i am having cucm 5.1, and configured an ftp server on pc to obtain the cdr flat files. The issue is the Disconnect Cause code is not the correct cause for call disconnect. Disconnect cause code for calls between two IP phones are perfect. From IP phone to PSTN, the cause code is always normal call clearing (cause code 16) even if the pstn user is busy, no answer, or any other status.The PSTN Calls are routed through MGCP Gateway with E1 PRI. I also checked the debug isdn q931, there i am able to obtain the correct cause code. Please help me to obtain the correct disconnect cause code through cucm CDR.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...