Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Incorrect time on CME phone display.

Incorrect time on  CME phone display

.

10 REPLIES
Hall of Fame Super Gold

Incorrect time on CME phone display.

This is asked very often, have you tried searching before asking ?

Incorrect time on CME phone display.

Yes, I did creating cnf files under telephony services and  then reset all phones. it doesnt worked out.

please assist me on this.

Hall of Fame Super Gold

Re: Incorrect time on CME phone display.

Maybe if you could take the time to read in full from the search results, as indicated above that would help you better.

Incorrect time on CME phone display.

under the telephony-service -

no create cnf-files

create cnf-files

Then reboot the individual phones

Whether above one is solution

Hall of Fame Super Red

Incorrect time on CME phone display.

Hi Karthikeyan,

Try the steps in this doc (pay special attention to Time Zone & phone model type)

Troubleshooting Incorrect Time Stamp on IP Phones in Cisco Unified CME

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/troubleshooting/guide/ts_time.html#wp1053981

Cheers!

Rob

Incorrect time on CME phone display.

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 2

sdspfarm tag 1 conferenceprof

sdspfarm tag 2 transcodeprof

conference hardware

no auto-reg-ephone

authentication credential admin cisco

max-ephones 110

max-dn 200

ip source-address 10.231.2.5 port 2000

max-redirect 20

service phone settingsAccess 1

timeouts ringing 60000

system message Nielsen - Chennai

url services http:///voiceview/common/login.do

url authentication http:///voiceview/authentication/authenticate.do 

load 7942 SCCP42.8-4-2S.loads

load 7962 SCCP42.8-4-2S.loads

time-zone 39

time-format 24

date-format dd-mm-yy

voicemail 2100

max-conferences 8 gain -6

call-forward pattern .T

call-forward system redirecting-expanded

hunt-group logout HLog

moh music-on-hold.au

web admin system name admin password cisco

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern .T

secondary-dialtone 0

directory entry 1 555 name HelpDesk

create cnf-files version-stamp 7960 Feb 02 2012 07:56:02

I reset all phones ,. still am not getting correct timing on all phones. phone type : 7942

New Member

Incorrect time on CME phone display.

Did you ever get this resolved?  If so what was the resolution?

Re: Incorrect time on CME phone display.

Hello

you can configure as below and it will help

router# clock   (type your date and time)

router (config)# clock tomezone (name) (x)

router(config)# clock summer-time 

telephony -service

time-zone X

time-format 24

date-format dd-mm-yy

no Create-cnf

create-cnf

Thank you
please rate if this will help



Hi,

Hi, I have the same issue, I could resolved it pointing to a NTP server because my clock on CME was incorrect. What is your IOS version? Regards.

I had the same problem too

I had the same problem too and I solved it as follow:

router(config)# clock timezone zone hours-offset

router(config-telephony)# clock time-zone number

1766
Views
5
Helpful
10
Replies
CreatePlease to create content