Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Insert fixed prefix in outgoing call with CCM

Hi to all,

my costumer had a CCM 3.3 with 2600 as MCGP.

They change telco provider, that require to digit a prefix 1033 everytime make a new outgoing call.

So I need to intercet the digit, and add the prefix, with CCME I how to do playing with dial-peer, but in CCM I never do it.

Where I have to play? There is a user-friendly gui in CCM (if yes where) or I have to play with dial-peer in mcgp?

thank you

Augusto.

1 REPLY
Silver

Re: Insert fixed prefix in outgoing call with CCM

no, in CCM with MGCP, all dial plan resides on CCM, MGCP gateway is not inteligent. it behaves as a client-server model, so you configure all dial plan stuff on CCM not mgcp.

you access CCM gui interface by:

http:///ccmadmin

you can add the required prefix under route pattern:

go to call routing-> route/hunt-> route pattern-> add your route pattern with the required settings, in the field (prefix digits (outgoing calls) add the required prefix. and thats all.

hth

/majdi

168
Views
0
Helpful
1
Replies