Re: install ip communicator on windows server 2003
Like all Cisco products, it looks to the registry to gather system information. You can check the registery to see if puts anything under Cisco hive. Possibly when it starts the installation process, it rights to the key and notes the system model, OS, etc. If it does (dont have one in front of me) you could change the OS=xxxx and maybe "trick" it. We do this with Callmanager when we want to install on a non MCS server. If you hack the registry, you can then install it on a Dell or whatever... (for testing, not for production)
And remember, not supported by TAC. W2K and XP only.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...