Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Install Service Module with Services Ready Engine(SRE) Version 8.6.1. CME 8.6

I  have a Call Manager Express 8.6.1 and a Services Module (SM) with  Services Ready Engine (SRE). I´m trying to install the Unity Express  8.6.1 version but when the system starts uploading the packages it  aborts the package extraction "cue-installer.SPA.sme.8.6.1" however the  system extracts the other packages. At the end it says that there has  been an error in the installation process and it gets cancelled.

I  thought that maybe this was happening because the package was  defective, I downloaded it again from cisco's web page but still same  problem.

I am uploading the package thru the TFTP server step by step according to cisco's guide

http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/ism-sm-sre.html#wp1119304

Need you help ASAP so I can finish this installation.

ERROR:

0005)06/03/2012 11:48:58 a.m. - (not logged in) (10.10.10.1)> Connected, sending welcome message...

(000005)06/03/2012 11:48:58 a.m. - (not logged in) (10.10.10.1)> 220-FileZilla Server version 0.9.39 beta

(000005)06/03/2012 11:48:58 a.m. - (not logged in) (10.10.10.1)> 220-written by Tim Kosse (Tim.Kosse@gmx.de)

(000005)06/03/2012 11:48:58 a.m. - (not logged in) (10.10.10.1)> 220 Please visit http://sourceforge.net/projects/filezilla/

(000005)06/03/2012 11:48:59 a.m. - (not logged in) (10.10.10.1)> USER cisco

(000005)06/03/2012 11:48:59 a.m. - (not logged in) (10.10.10.1)> 331 Password required for cisco

(000005)06/03/2012 11:49:00 a.m. - (not logged in) (10.10.10.1)> PASS *****

(000005)06/03/2012 11:49:00 a.m. - cisco (10.10.10.1)> 230 Logged on

(000005)06/03/2012 11:49:00 a.m. - cisco (10.10.10.1)> TYPE I

(000005)06/03/2012 11:49:00 a.m. - cisco (10.10.10.1)> 200 Type set to I

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> PASV

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> 227 Entering Passive Mode (10,10,10,2,192,35)

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> RETR cue-installer.SPA.sme.8.6.1

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> 150 Connection accepted

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> 426 Connection closed; transfer aborted.

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> QUIT

(000005)06/03/2012 11:49:01 a.m. - cisco (10.10.10.1)> 221 Goodbye

  • IP Telephony
1 REPLY
Hall of Fame Super Gold

Re: Install Service Module with Services Ready Engine(SRE) Versi

Can you show the log of what you're doing from CUE console.

302
Views
0
Helpful
1
Replies
This widget could not be displayed.