Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Installation of CCM 4.X on IBM e 330 Series Server

All,

I am trying to install CCM 4.X into a IBM e 330 Server Model 8674 PIII 1.2GH , 1 GB memory and is not allowing me due to Cisco incompatibily hardware (aproved harwdware), but if I look into Cisco web site it shows that the IBM server is aproved CCM hardware. Has anyone come up into this issue and what was the fix?

Thanks a lot in advance for your help.

Regards,

Maddox

5 REPLIES

Re: Installation of CCM 4.X on IBM e 330 Series Server

Are you using the hardware detection disks for ibm ?

New Member

Re: Installation of CCM 4.X on IBM e 330 Series Server

No, I am not. Just when I am trying to install CCM 4.X I am getting right the way the message error " you are not using Cisco approved hardware. You must use Cisco approved hardware to install CCM". So here I was stuck, and for the time been I need to do some research and find out how can I bypass this message and install the CCM.

Best,

Maddox

New Member

Re: Installation of CCM 4.X on IBM e 330 Series Server

Hi All,

I am trying to install CCM 4.x into an IBM e330 Series and while is installing Cisco Directory I am getting the following error:

?Failure occurred during the Cisco Directory Installation.

Refer log file C:\\Program Files\Common Files\Cisco\Directory\IntegratedSetup.trc for details

Aborting Cisco CCM install?

I have had a look at previous posts on this, cannot find a suitable solution.

Does anyone know links from where I can download the followings files?

1. Shutdown.exe

2. win-OS-Upgrade-K9.2000-2-7.exe

3. win-OS-Upgrade-K9.2000-4-3.exe or (?-4-4a)

4. IIScript.msi

For your review I am including the following outputs from files: CCMInst and IntegratedSetup.trc on the atachement.

Has anyone encounter this problem and what was the fix?

Thanks in advance for your help.

Cheers,

M

New Member

Re: Installation of CCM 4.X on IBM e 330 Series Server

Did you resolved your problem? I am trying to install Callmanager in a IBM server and I am getting the same error as you

C:\\Program Files\Common Files\Cisco\Directory\IntegratedSetup.trc

Thanks

New Member

Re: Installation of CCM 4.X on IBM e 330 Series Server

Unfortunately I had hardware issues with the IBM box as well HDD's. I bought from Ebay another two and those were DOA so I give up on IBM box.

However I move to VMware on a regular PC , core duo and 6GB RAM.

Regards,

Maddox

159
Views
0
Helpful
5
Replies