Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Integrate 7204VXR with Avaya Definity

Hi All,

Does anybody knows how to integrate my 7204VXR router with Avaya Definity for Voip service?

Both ends will have vxr & avaya definity via T1 data connection.

Please, i really need your help & expertise.

Thanks

Cliff

  • IP Telephony
3 REPLIES
Hall of Fame Super Gold

Re: Integrate 7204VXR with Avaya Definity

New Member

Re: Integrate 7204VXR with Avaya Definity

I have been seeing a lot of samples but i couldn't understand some of the parameters.

Like the one below:

voice-port 2/0/0

ren 5

signal groundStart

!

voice-port 2/0/1

!

dial-peer voice 7000 pots

destination-pattern 3000

port 2/0/0

forward-digits 0

!

dial-peer voice 1000 voip

destination-pattern ....

session target ipv4:172.20.43.155

!

dial-peer voice 7001 pots

destination-pattern 3001

port 2/0/1

I just need to understand those parameters and when to use them.

Thanks

Cliff

Hall of Fame Super Gold

Re: Integrate 7204VXR with Avaya Definity

Hi, this is an example using an analog port, you need to look for digital ports. You also need to know which signalling protocol your PBX is using, the first preference would be PRI.

In summary doing voip is not much complicated but it also requires application so if you could study the primer material on CCO, that would let you understand how a dial-peer works, etc.

Alternatively if you just want the job done fast and well again my suggestion is to hire someone to make it for you.

107
Views
0
Helpful
3
Replies