Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Integrate Analog EPBEX to Cisco Call Manager

We have Cisco Call Manager 7.1 ,Cisco Voice Gateway Router 2821.Now we are wanting to integrate our existing Analog EPBEX in which 300 Pcs analog phone are running to CUCM.Now the PSTN line connected with EPBEX.

What will be the best possible cheapest solution to integrate CUCM to EPBEX.

 

Everyone's tags (1)
4 REPLIES
Hall of Fame Super Silver

What is the PBX manufacturer

What is the PBX manufacturer and model? What capabilities does it have, here is preferred order of integrations:

  1. SIP
  2. H.323
  3. PRI QSIG
  4. PRI
  5. T1/E1 CAS
  6. Analog trunks

which one can it do, as with CUCM and GWs you can do anyone of them.

New Member

Deat Daren, Here are details

Deat Daren,

 

Here are details of EPABX

 

1)Make of EPABX: Crompton Greaves
2)Model: NODEX-NE-1200
3) It will not Support LAN Port
4) IT will not Support Digital Trunk lines
5) It will support only Ordinary Digital Exchange Trunk lines similar to taht of BWTL/BWTD (Both Way Trunk Dial)/Both Way Trunk- Loop), E&M Trunk with certain restrictions.
6) The existing exchange not even VOIP compatible or ISDN Compatible.

 

Honestly, I think you are

Honestly, I think you are flogging a dead horse keeping that EPABX in place. As a matter of interest what is the main reason for doing this? cabling?

 

If your only option is E&M, then you will need to use a Cisco VoiceGateway with E&M VICs.

 

how many of these E&M trunks are we talking about?

Please remember to rate useful posts, by clicking on the stars below.

New Member

Now in this EPBAX 300pcs

Now in this EPBAX 300pcs phone are running in a single time it's not possible to change the all analog phone will will change it step by step.

One thing need to confirm that I thik cisco has declared EOS of E&M card.Onle one E&M card is present.

Is there any way to integrate Cisco VG to EPBAX?

42
Views
0
Helpful
4
Replies
CreatePlease login to create content