Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Integrate Callmanager 4.2 with harris 20-20

Dear All,

I have call manager 4.2 and we have integration with Harris pbx 20-20 through PRI E1 using Etsi signal and I tried all "ISDN switch type on voice gateway as net5 ,4ess..." I debugged q931 when i tried all types of isdn switch type but all signal generate "bad frame" taking into consideration that we are using two Multiplexers TC8518 T1/E1

your fast reply is highly appreciated

4 REPLIES
Green

Re: Integrate Callmanager 4.2 with harris 20-20

MGCP or H.323?

Check network side/clock source

Normally should be the opposite, once emulates the PSTN switch.

New Member

Re: Integrate Callmanager 4.2 with harris 20-20

mgcp and I already configured the call manager as user side and clock source internal and this opposite on PBX

New Member

Re: Integrate Callmanager 4.2 with harris 20-20

thanks for you.

I finished the integration using ETSI signaling but now I need to add prefix behind the calling name i.e when i make call from call manager to PBX the presented name is Hany I need to add "TB3" behind the name regardless the name

Best Regards;

Hany

Hall of Fame Super Gold

Re: Integrate Callmanager 4.2 with harris 20-20

It is not possible to manipulate names in Cisco IOS.

You would need a custom TCL/IVR script and using H.323 for this.

If you're interested in having the script developed for a reasonable fee, contact me at the address present in my profile.

411
Views
0
Helpful
4
Replies