Integrating Unity Connection 9 with CUCM 9 via Skinny issue
I am unable to integrate via skinny CUC 9 into CUCM 9 - the Unity voice port never registers in CUCM . If I run the port group test in Unity I get the following error : Failure reason: ErrorCannotEstablishWinsockConnection. connectToServer(126.96.36.199:2000)->0x80045A03 . I have tried ver 9.0 ( 188.8.131.52000-5 ) and 9.1 ( 184.108.40.20600-11 ) on both Unity and CUCM with the same results. If I utilise Unity Connection 8 with CUCM 8 I do not have an issue - it works fine. I am running all the servers in a vmware environment ( ESXI 5 ).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...