Our Customer have 01 CallManager in Genebra and another in Brasil. Each CallManager is the Cluster, and He need to have a only one database. There is configuration that could be to do in the CallManager for unified the database or it's necessary a one specific software to do the execute this activity.
If I understand your question correctly, you have two separate CallManager servers in two separate clusters and you wish to consolidate them into a single cluster, correct?
If that is the question, then the answer is there's no way to demote a publisher to have it become a subscriber in an existing cluster. You will need to install it from scratch as a subscriber in the existing cluster.
You will therefore have some work to do around recreating all the devices currently configured in the publisher that will be decommissioned and configuring them in the other cluster. The Bulk Administration Tool may come in handy here.
Another consideration here includes making sure that the requirements for clustering across a WAN are met.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...