Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Integration With YX Wireless Sip Device Fail

Hi All,

We have purchase a device for mobile calls and it works with SIP protocol, our configuration is:

* CUCM 8.5

* Voice Gateway 3825 with IOS: c3825-adventerprisek9-mz.124-24.T6.bin

* Cisco Ip Phones registered in Callmanager with SCCP

* Eyebeam softphone registered in CallManager as a SIP Device.

On CUCM i have been configured only the route pattern.

The SIP connection to the device is in the gateway (See dial-peer 5000), this is the configuration of the gateway:

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

fax protocol cisco

h323    

  call start slow

sip     

  registrar server expires max 3600 min 3600

  no update-callerid

voice class codec 1

codec preference 1 g729br8

codec preference 2 g729r8

codec preference 3 g711ulaw

codec preference 4 g711alaw

voice translation-rule 200

rule 1 /^9030/ //

voice translation-profile celular

translate called 200

***Incoming dial-peer  from CUCM****

dial-peer voice 1000 voip

voice-class codec 1

incoming called-number 9030..........

*** Outgoing Dial-peer*****

dial-peer voice 5000 voip

description SALIDA Celular Celufijo DualSim

translation-profile outgoing celular

service session

destination-pattern 9030..........

voice-class codec 1

session protocol sipv2

session target ipv4:10.130.1.9

dtmf-relay sip-notify rtp-nte

Every time when try to call from IpCommunicator or another SCCP phone  the call is dropped  but when i call from Eyebeam softphone it works correctly.

Note: 10.130.1.4 --> Ip Address of CUCM

         10.130.1.2 --> Ip Address of Voice Gateway.

         10.130.1.9 --> Ip Address of YX Wireless Sip Device (thirt party device)

Attach you can find:

debug ccsip calls ( For both IpPhone SCCP and Eyebeam Sip Softphone)

debug voice ccapi inout ( For both  IpPhone SCCP and Eyebeam Sip Softphone)

Any help will be appreciate.

Thanksss.

4 REPLIES
Community Member

Integration With YX Wireless Sip Device Fail

Any can help with this..

Thanksss

Community Member

Integration With YX Wireless Sip Device Fail

Hi,

Did you solve the problem?

Because I´m trying to configure an YX Wireless Lyric VoIP as a SIP Trunk for a UC540, but I can´t, any advice would be helpful.

Thanks.

Community Member

Integration With YX Wireless Sip Device Fail

Hi Christian,

Did you solve the problem with the integration? We would like to buy the same Lyric equipment, however the Lyric's documentation does not specify integration with Cisco.

Thank you.

Community Member

Integration With YX Wireless Sip Device Fail

Hi Friend...

Not, we finally purchase another equipment from another provider (Easy Phone Goip)

Good luck

638
Views
0
Helpful
4
Replies
CreatePlease to create content