Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inter-cluster Trunk Compatibility

I have to (2) CCM 4.2 clusters that needs to be upgraded to CUCM 7.1 and want to upgrade (1) cluster at a time.  If I upgrade (1) cluster to 7.1 and left the other cluster on 4.2, will the inter-cluster trunk still work after upgrade???

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Inter-cluster Trunk Compatibility

I believe so, i did the exact same thing a year or so ago and had no problems.

Re: Inter-cluster Trunk Compatibility

Nelson,

Yes, ICT will work just fine. I have recently (1 month ago) done this at

two separate customers, using the exact same versions you are dealing with.

In the past year, we have done this quite a bit and have had good success.

Make sure you pay attention to dial plan overlaps and Regions/CODECs and you

should be good to go.

HTH.

Regards,

Bill

On 9/1/10 4:18 PM, "nelson.chu"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

2 REPLIES

Re: Inter-cluster Trunk Compatibility

I believe so, i did the exact same thing a year or so ago and had no problems.

Re: Inter-cluster Trunk Compatibility

Nelson,

Yes, ICT will work just fine. I have recently (1 month ago) done this at

two separate customers, using the exact same versions you are dealing with.

In the past year, we have done this quite a bit and have had good success.

Make sure you pay attention to dial plan overlaps and Regions/CODECs and you

should be good to go.

HTH.

Regards,

Bill

On 9/1/10 4:18 PM, "nelson.chu"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

306
Views
5
Helpful
2
Replies
CreatePlease to create content