Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inter-group call on Callmanager 4.0

I have callmanager 4.0 installed, i want to achieve a scenario where three different groups could only call within the group but not inter-group. I set up 3 different callingsearchspace/partition but still the group can do intra group call, which i do not want. {Group A = 100X, Group B =200X, Group C = 300X}

4 REPLIES
Hall of Fame Super Silver

Re: Inter-group call on Callmanager 4.0

You are on the right path, all of these is accomplished via CSS/PT, so here is what you need to do:

put all group A DNs in parition lets call it GroupA_PT,

put all group B DNs in GroupB_PT

put all group C DNs in GroupC_PT,

create 3 Calling Search Spaces, each referencing it's own PT, and not the others, i.e.

GroupA_CSS, inlcudes GroupA_PT

Assign corresponding CSS to local devices, i.e. phone in group A would use GroupA_CSS.

That's it!!!

HTH,

Chris

New Member

Re: Inter-group call on Callmanager 4.0

Thank you Chris, I actually did what you suggested but I can still make inter group calls. Is there any other things I need to do?

New Member

Re: Inter-group call on Callmanager 4.0

Hi Chris,

It is working now, I restarted the server and it is fine.

Hall of Fame Super Silver

Re: Inter-group call on Callmanager 4.0

Glad to hear that.

Chris

96
Views
0
Helpful
4
Replies
CreatePlease to create content