I have a user that has the Intercept button on her phone and wants to remove the feature. I looked and cannot find where it is configured, does anyone know where to look. I tried under "End User" and "Manager Configuration" but can' find a reference to it anywhere. Thanks.
Look under the phone configuration and find out what softkey template the user has. Then go to the softkey template, copy it, remove the Intrcpt key, save, and apply to the user's phone. That will just remove it from their phone. You could always remove it from the original template to perform it globally.
Thanks for the confirmation. I did what you suggested but once I got to the template there was only:
IP Mgr Assistant
under applications no individual features.
What I did was give her a different template that most users have here. For some reason there are only 3 people that have the template that I removed not sure why they set it up that way. Thanks again.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...