Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Intercluster Trunk 4.2 - 5.1 Problem

I have a newly installed 5.1 server that I have a non-gatekeeper intercluster trunk setup to a 4.2 server on. Calls flow perfectly from a 5.1 registered phone to a 4.2 extention but all I recieve is a fast busy when a 4.2 ext calls a 5.1. Advice?

5 REPLIES
Green

Re: Intercluster Trunk 4.2 - 5.1 Problem

Hi,

Make sure the Trunk configuration is correct:

Check Incoming CSS in 5.1 Trunk and make sure that IP addresses assigned are correct for example:

If Device Pool in Trunk in 5.1 contains CM1 and CM2 as primary, the Trunk in 4.2 should point first to CM2 then CM1 and viceversa.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/sys_ad/5_0_4/ccmsys/a08trnk.htm#wp1027355

Can we get CCM detailed trace from both clusters ?

New Member

Re: Intercluster Trunk 4.2 - 5.1 Problem

The following is the CCM-SDI trace from the 5.1:

TimeStamp: 02/16/2007 18:04:56.022

Trace Name: CCM

Message: DeviceTransientConnection - Transient connection attempt. Connecting Port:5060 Device name [Optional].: Device IP address.:192.168.105.3 Protocol.:SIP Device type. [Optional]:336 Reason Code [Optional].:4 Registering SIP User. [Optional].:2576800 App ID:Cisco CallManager Cluster ID:StandAloneCluster Node ID:SQTSIP-PUB

ClusterId: StandAloneCluster

NodeId: SQTSIP-PUB

Correlation Tag: Alarm

Trace Level: All

Mask: ffff

Ip:

Device:

I verified CSS setup and it appears correct.

New Member

Re: Intercluster Trunk 4.2 - 5.1 Problem

Any resolution on this? I am having the same problem with 4.1 to 6.0

Thanks

New Member

Re: Intercluster Trunk 4.2 - 5.1 Problem

Hi, i has the same problem. The calls from CCM 4.1 to CCM 6.0 works but the calls from CCM 6.0 to CCM 4.1 fast busy. It is solved adding in both trunk side the CCM Subcriber and Publisher IP.

I hope help you

Regars

Cristian

New Member

Re: Intercluster Trunk 4.2 - 5.1 Problem

Cristian,

You are correct. I made this change and all is well.

187
Views
5
Helpful
5
Replies
CreatePlease login to create content