Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Intercluster Trunk between Be3000 and Asterix.

Hey Guys,

Is this possible to achieve with be3k at one end ?

Thanks

Varadarajan.R

4 REPLIES

Intercluster Trunk between Be3000 and Asterix.

I know it works between CME and asterisk (I had it working myself). I have seen people say it won't work between CUCM and asterisk, because of authentication and that you would therefore need a CUBE.  However, have a try with a CUCM SIP Trunk, and make sure on the asterisk side you allow anonymous INVITES (i am not sure about the exact wording in asterisk), basically running SIP without authentication/registration.


=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

Please remember to rate useful posts, by clicking on the stars below.

New Member

Intercluster Trunk between Be3000 and Asterix.

Thanks a lot dennis.

We dont need any authentication. Just a direct trunk between be3k and asterix. so the end users can be able to call each other using this trunk. The issue is, we dont have cucm, we have a BE3k.

Thanks

Varadarajan.R

Cisco Employee

Intercluster Trunk between Be3000 and Asterix.

Hi Varadarajan,

If you are really willing to implement it, I would recommend opening a case with the PDI Helpdesk to get a proper confirmation as it is a design question.

http://www.cisco.com/go/pdihelpdesk

HTH

Manish

New Member

Intercluster Trunk between Be3000 and Asterix.

HI Manish,

Yes, we do need to this at the earliest, hence my posts here. And I shall go through PDI. Thanks for the suggestion.

Varadarajan.R

340
Views
0
Helpful
4
Replies
CreatePlease to create content