I'm setting up an ICT for a RightFax deployment. The ICT is in a device pool that references a CallManager group with three servers. My guess is that the ICT should be accessible via the CM that is first in the list of servers in the CM Group. In this case, it looks like it's accessible only by the second server. Is there any reason why it would be accessible by the second server in the list? Is there a way to force it to be accessible by the first instead? I'm going off of the assumption that the ICT can only be accessed on one server at a time.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...