I work for a company that just acquired several smaller companies and they have asked me to figure out how to interconnect the offices so that you can just pick up the phone and dial the 5 number extension and get the person you want.For example my company is in Texas and the other company is in Georgia.I have no Idea how to do this so any help that you can give me I would greatly appreciate it.Thanks in advance and have a great day.
You have not mentioned what phone system exists at each location, but since you are posting on a Cisco forum, I will assume that at least one of the locations has a Cisco phone system. If that is the case, and this is in all seriousness: get yourself a Cisco partner who can do this with you. There is a lot to consider here, and you'll learn so much from the partner during this migration to a Unified Communications architecture.
As a matter a fact we are in the process of going through a UC upgrade now from 7 to 8 and I recommended that we keep this consultant on so that we could get this accomplished as well but they said."No we would like you to work on this and figure out how to do it yourself.I myself just started this job and I was hired as a R&S guy and they needed someone to take over the voice and since I have my CCVP as well they don't want to hire another voice person.I know how to to basic stuff in CUCM but honestly I'm more of R&S than Voice. So I've bought all kinds of books on CUCM,CCX,Presence,IP Mobility, Microsoft Lync.Pretty much anything that I can get that will get me up to speed on how to work indepth in voice but what they want with the interconnection of the offices that's a little more than just reading a book. I have until April to get the office part done so hopefully by then I can come up with something.
I really appreciate you offering to help, I will get as much info about the questions that you are asking and I will definitly get back to you. I won't be able to get any info until Monday but as soon as I get it I will reply back to the post and thanks again for offering to help I really do appreciate it.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...