Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Interdigit Timeout UCM 7.1.3

Frends

I want to change de interdigit timeout in UCM 7.1.3, but I cant find the option.

I need to find this please

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Interdigit Timeout UCM 7.1.3

Hello leandro,

To change the Interdigit Timeout on UCM 7.X do the following steps:

*** Go to System Menue ===> Service Parameters ===> Select the Publisher Server ===> Select the Service (Cisco CallManager)

*** Go to Cluster Parameters (Device - General) Section ===> T302 Timer is what you need to change in order to change the Interdigit Timeout, by default its 15000 MS (or 15 Seconds), Minimum is 3000 MS (or 3 Seconds) and Maximum you can configure is 75000 MS (75 Seconds).

I hope this was helpfull.

Thanks,

best,

Monty

Cisco Voice Engineer

1 REPLY
New Member

Re: Interdigit Timeout UCM 7.1.3

Hello leandro,

To change the Interdigit Timeout on UCM 7.X do the following steps:

*** Go to System Menue ===> Service Parameters ===> Select the Publisher Server ===> Select the Service (Cisco CallManager)

*** Go to Cluster Parameters (Device - General) Section ===> T302 Timer is what you need to change in order to change the Interdigit Timeout, by default its 15000 MS (or 15 Seconds), Minimum is 3000 MS (or 3 Seconds) and Maximum you can configure is 75000 MS (75 Seconds).

I hope this was helpfull.

Thanks,

best,

Monty

Cisco Voice Engineer

544
Views
0
Helpful
1
Replies
CreatePlease to create content