Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Interdigit Timeout

I have a Call Manager 8.6 system thats driving me crazy. For some reason dialing between extensions waits for the interdigit timeout and the users are complaining. I have run a "Route Plan Report" and looked in the DN's and route patterns and verified there are no collisions. In the Dialed Number Analyser it shows that it is waiting for the Interdigit timeout. How can I figure out why it is waiting for the interdigit timeout ifthe route plan report and DN's dont show any overlap?

Thanks 

Everyone's tags (3)
3 REPLIES
Hall of Fame Super Silver

Interdigit Timeout

Make sure you do not have any patterns such as XXXX, etc [1-4]XXX, !, etc, etc

Chris

Cisco Employee

Interdigit Timeout

If you still can't find it in the GUI you can do a Dialing Forest Dump after hours. Sometimes it's easier to view that way.

https://supportforums.cisco.com/docs/DOC-23902

Regards,

Jesse

New Member

Re: Interdigit Timeout

If you confirm that there are no overlaping patterns present then it may be possible with the NANP pattern like 9.@ or 9.!

Can you let us know what's the called party? It that a internal or external call?

Sent from Cisco Technical Support iPhone App

2118
Views
0
Helpful
3
Replies
CreatePlease to create content