I have a gateway that I am trying to use for mobile voice access. It is the only H.323 gateway in the network and it is remote from the call manager. PSTN is SIP which is pointed directly to CCM, and that all work fine. The problem is the H.323 is also a EasyVPN client at a remote site. I have reachability to CCM from the inside interface, but not from the outside. Here are the relevant parts of the router config (with some redacting).
service mva flash:2:/IVRMainpage.vxml
ip address 18.104.22.168 255.255.255.0
crypto ipsec client ezvpn EASY-VPN-CLIENT
encapsulation dot1Q 6
ip address 192.168.130.17 255.255.255.248
crypto ipsec client ezvpn EASY-VPN-CLIENT inside
h323-gateway voip interface
h323-gateway voip bind srcaddr 192.168.130.17
ip http client source-interface FastEthernet0/0.6
dial-peer voice 1197 voip
incoming called-number 1197
I copied down the VXML file because the application command wasn't able to load it directly. The router tries to retrieve some audio files file CCM, but fails because it isn't using the right source address.
Oct 29 12:05:04.005 EDT: //21/00276EDD0800/VXML:/vxml_vapp_bgload_from_proc:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...