Have a site that has been working fine for 3 months. They rebooted the MGCP gateway yesterday and now random incoming calls have one way voice, called party can here calling party. Occasionaly the call works fine only to have one-way after a transfer. The only thing I found with a search is the bind media, which I already have in the MGCP config. Help?
I was able to resolve this. When I did a show controller t1 0/0/0 I was seeing a lot of slips, so I added network-clock-select 1 t1 0/0/0 and it seems to have resolved the issue. I guess I don't understand why it worked fine for 3 months and this only became an issue after reboot.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...