Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Internal calls only display ext number not name

Greetings -

I have many 7960s/7912s registered with CUCM v6.1. Everything is working properly except for one thing - whenever a user dials another internal extension (5050, for example) only the extension number is displayed on the phone of the calling party. However when the called party picks up, the display changes to show both the extension AND the display ID (user's name).

Is there any type of setting I can adjust so that the calling party phone displays both the called party's extension and name instead of just the extension number (unitl the user picks up)?

Any information would be greatly appreciated.

Thx

Joe

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Internal calls only display ext number not name

Make sure you have configured the Alerting Name field, the description of the behavior is you only configured the Display (Internal Caller ID)

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: Internal calls only display ext number not name

Make sure you have configured the Alerting Name field, the description of the behavior is you only configured the Display (Internal Caller ID)

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Internal calls only display ext number not name

Bingo. Thank you very much.

Joe

128
Views
0
Helpful
2
Replies
CreatePlease to create content