Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

international calls on sip trunk from the UK

Cisco 2651XM router connected to the internet

IOS: c2600-adventerprisek9-mz.124-15.T8.bin

7940G ip phone

sip trunk working fine

I'm having difficulty trying to configure my dial-peers so I can make international calls. I've read the cisco document 'Cisco CallManager Express (CME) SIP Trunking Configuration Example' but the config is based around the american dial system and I'm in the UK.

Every land-line number in the UK is 11 digits, so (being a beginner) I made a destination pattern of ........... (eleven dots) and this has always worked. But international numbers are 13 digits and my config only recognises the first eleven digits when dialing, even if add I add another dial peer and I've tried numerous configs. International calls from the UK always start 00.

Attached is a copy of the phone section of my running config. If anyone can help with the the proper way to config international calls I'd be grateful.

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Re: international calls on sip trunk from the UK

Instead of. you can only have 1 destination pattern per dial-peer.

Matt

4 REPLIES

Re: international calls on sip trunk from the UK

Try using destination pattern .T

Also a good link for dial-peer info (Thanks Nic :)

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml

Matt

New Member

Re: international calls on sip trunk from the UK

ok thanks but when you say 'try using destination-pattern .T' do you mean:

in addition to

or

instead of ?

Re: international calls on sip trunk from the UK

Instead of. you can only have 1 destination pattern per dial-peer.

Matt

New Member

Re: international calls on sip trunk from the UK

ah yes thanks Matt your suggestion worked. Goodness me if only I'd known it was so easy.

232
Views
0
Helpful
4
Replies
This widget could not be displayed.