I am the senior administrator for a local ISP, and we just started having a problem with some users, dialing up with a local access number, and when they get their phone bill it shows a number that belongs to us but is not what they dialed, and getting long distance fees applied. It has got to be something in our access server, router or gateway, on how this is getting routed wrong. The configs have not been changed in orver 1 1/2 years, and suddenly started. Anyone out there, have any ideas? Thanks in advance.
I wouldn't be so sure that something is wrong with the access server. As far as I know there is no user equipment configuration that can change the way in which telco bills calls.
Instead, if users dial a number that belongs to you, but then telco billing systems get your numbers and related charges mixed up (perhaps they have some commonalities like client ID or routing), here you are you are with the problem described. I'm afraid that it can be painful to prove, so good luck.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...