Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Intigration between Call manager 5.1 and voice gateway 2811

Hello

I am having cisco 2811 router with NM HDA module ,with VWIC2-4FXO,VIC-4FXS/DID. and cisco Call Manager 5.1 . now i want to integrate both system for router voice call to PSTN network to IP network visa-versa.Please help me out to configure and resolve the issue

Thanks In advance

Regards

Subhasis

2 REPLIES
Bronze

Re: Intigration between Call manager 5.1 and voice gateway 2811

Hi friend, initial steps:

CCM

1. Configure your gateway (h323 or mgcp)

2. Configure your route-patterns

3. Assign the partition, CSS, MRGL, Region, Location to your gateway.

GATEWAY

1. Initially, for making calls to the PSTN numbers, create a dial-peer pots with a destinatton pattern .T, the port should be your FXO port

dial-peer voice 100 pots

destination-patterns .T

port 1/0 (FXO port)

2. To receive calls from the PSTN to your IPT network, configure a connection plar pointing to an internal ip phone in your FXO voice port.

voice-port 1/0 (FXO port)

connection plar 1212 (DN IP Phone).

We can help you if you post your gateway configuration.

Hope this help

David

Bronze

Re: Intigration between Call manager 5.1 and voice gateway 2811

This is a good guide for this configuration.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b06gtway.html

Best regards

David

355
Views
5
Helpful
2
Replies