After updating to IOS version 15.1(4)M6 there is a problem with outgoing calls through the PRI.
Router configuration in the attach. On the gateway turned on debugs:
The following ISDN debugs are enabled on all DSLs:debug isdn error is ON. debug isdn q931 is ON. (filter is OFF) DIALPEER: debug voip dialpeer error call is ON (filter is OFF) debug voip dialpeer error informational call is ON (filter is OFF) debug voip dialpeer error software is ON debug voip dialpeer error software is ON informational debug voip dialpeer function is ON (filter is OFF) debug voip dialpeer inout is ON (filter is OFF) debug voip dialpeer detail is ON (filter is OFF).
The result of debug also in attach.
On CUCM 9.1 configured SIP trunk to this gateway. When I call the test number 89261234567 I hear a busy signal. If I upload this version 12.2(24)T6, with exactly the same configuration, everything works successfully. Accordingly some problem lies precisely in the new IOS. Please tell me to what may be the case.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
[toc:faq]CUCM Database Replication is an area in which Cisco customers
and partners have asked for more in-depth training in being able to
properly assess a replication problem and potentially resolve an issue
without involving TAC. This document discusse...