Why is h225 timeout tcp establish gone from voice service voip/h323 and only left in voice class h323 ? Like I really want to put it on each dial peer?!?!? Why remove it from global? What is h225 timeout setup ?
I can't speak on the reasoning for the changes you've come across in IOS 15. But, I think I can at least address your last question about the h225 timeout setup. This was addressed (slightly different info) in an Ask The Expert thread. See: https://supportforums.cisco.com/message/495940#495940.
So, in your example:
voice service voip
h225 timeout setup 2
The default h225 timer would be reduced to 2 seconds before hunting to the next dial peer.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...