Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IOS and SIP 488/403

Hi Pro,

My gateway is runnig IOS c3845-advipservicesk9-mz.124-4.T1. It has 2 ISDN PRA interfaces and is talking to a SWYX server that hosts tens of phones. When a call is placed from PSTN to a number in SWYX server and when a SIP 488(Not Acceptable Here) or 403(Forbbiden) message is received from the SWYX, the ACK message is sent back. Then the call SHOULD STOP. But the call does not stop. It flows out of another PRA, and comes back again in the first PRA. The loop continues untill all channels are taken and no other calls can be made. This is disastrous.

How can I stop the IOS from carrying on the call when it receives such messages?

Any guidance is appreciated.

Thanks.

1 REPLY
Silver

Re: IOS and SIP 488/403

Add a codec G.711 ulaw in the setting of the gateway.

297
Views
0
Helpful
1
Replies
CreatePlease to create content