Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IP Communicator 2.1.3

How to disable the Web access, please provide the steps for the same...

Web access enable option cannot be changed to No on the security configuration.

appriciating for quicker response...

5 REPLIES

Re: IP Communicator 2.1.3

set up ACL blocking 80 using either the IP of the communicator or the CCM as the host.

New Member

Re: IP Communicator 2.1.3

Hi

I am trying to access an application which is installed on my local PC with the following URL http://localhost, when the ip communicator is on it takes me to the Device configuration screen insted of the application, if i block the port 80 will i be able to access the application.

Thanks...

Re: IP Communicator 2.1.3

you could always configure your app to listen on a different port http://localhost:8080 perhaps?

New Member

Re: IP Communicator 2.1.3

is there any posibilty for the ip communicator to listen to a different port since i cannot change the port for the application.

Cisco Employee

Re: IP Communicator 2.1.3

CIPC interferes and conflicts with the web server installed on the PC

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K54967101

You can only disable it but there is no way to have it listen to other port

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
113
Views
0
Helpful
5
Replies
CreatePlease to create content